ExxonMobile
Castrol
Shell
Valvoline
Anderol
LHB Industries

Aeroshell Fluid 41
MINERAL "SUPER CLEAN" HYDRAULIC FLUID

Aeroshell Fluid 41 Aviation hydraulic fluid Information:

QC Lubricants carries Aeroshell Fluid 41 in 55 Gallon Drums.

Aeroshell Fluid 41 Product Description:
Aeroshell Fluid 41 is a mineral oil based "super clean" hydraulic fluid containing an oxidation inhibitor and a non-zinc anti-wear additive. AeroShell Fluid 41 is dyed red for identification and leak detection purposes.

Aeroshell Fluid 41 may be used in aviation and industrial hydraulic systems where very low temperature flow properties are desired, synthetic rubber seals are in use and "super clean" solid particle contaminants standards are required. It is not recommended for systems using natural rubber seals.

AeroShell Fluid 41 can be used in both aviation and non-aviation systems

AeroShell Fluid 41 is mineral oil based aircraft hydraulic oil with excellent low temperature characteristics that is capable of operating over a wide range of temperatures.

AeroShell Fluid 41 Applications:

Aircraft applications where a MIL-PRF-5606H fluid is specified or recommended

Hydraulic oil systems, particularly those that are subject to a wide variation in ambient operating temperatures

In winter service for bucket trucks and other portable equipment subject to severe low temperature operation

AeroShell Fluid 41 Features/Benefits:

	Meets the MIL-PRF-5606H cleanliness requirements for aviation hydraulic oils
	Superior low temperature properties
	Compatibility with synthetic rubber components
	Dyed red for easy identification
	Good anti-wear properties

AeroShell Fluid 41 Approvals:
MIL-PRF-5606H

Typical Properties of AeroShell Fluid 41
Product Code		60424
Property	Test Method
Viscosity
@ –40°C, cSt	D 445	434
@ 130°F, cSt	D 445	10.5
Gravity, °API	D 1298	31.7
Color	Visual	Red
Flash Point, °F	D 92	215
Pour Point, °F	D 97	Below -75
Acid Number, mg KOH/g	D 974	0.03
Cu corrosion, 212°F, 72 hrs	D 130	Pass
Precipitation No	D 91	0
Low Temperature Stability	F 34511	Pass
Rubber Swell, Synthetic, % Inc	F 36041	23.2

PROPERTY

MIL-H-5606G SPECIFICATION

AEROSHELL FLUID 41

Aeroshell Fluid 41 Product Code

421-141

ASTM METHOD

Aeroshell Fluid 41 Colour

Red

Red

Visual

Aeroshell Fluid 41 Density @ 15°C. kg.m³

Report

873.5

D 1298

Aeroshell Fluid 41 Pour Point, ° C max.

-60max.

-60

D 97

Aeroshell Fluid 41 Flash Point, ° C. min.

82 min.

83

D 92

Aeroshell Fluid 41 Viscosity cSt.

@ -54°C cSt. 2500 max. 1607
D 445

@ -40°C cSt. 600 max. 383
D 445

@ 40°C cSt. 13.2 min. 13.6 D 445

@ 100°C 4.90 min.
5.2 D 445

Aeroshell Fluid 41 TAN-E, mg KOH/g

0.20

0.07

D 664

Aeroshell Fluid 41 Particulate Contamination No. of particulates/ 100ml 10000 max. pass

5-15 micron 1000 max. pass
FED 791-3006

16-25 micron 150 max. pass

26-50 micron 20 max. pass

51-100 micron 5 max. pass

These characteristics are typical of current production. Future production will
conform to Shell's specification, variations in these characteristics may occur.

Aeroshell 555

For Aeroshell Fluid 41, or any product we carry at QC Lubricants, if you have any questions, please give us a call. Our dedicated staff is eager to hear from you!

Penreco Daubert Ashland Dow Corning


QC Lubricants CAGE CODE 9Y364 7360 Milnor St • Philadelphia, PA 19136 (215) 333-4187 Direct Line Toll Free With Extension: (800) 887-2436 For Technical Assistance Dial Extension 203 for Stan Jakubowski For Sales Assistance Dial Extension 211 for Lu Ann Quinn

	We actively supply a comprehensive line of MIL-SPEC and commercial lubricants.

Aeroshell Fluid 41 MINERAL "SUPER CLEAN" HYDRAULIC FLUID

Aeroshell Fluid 41
MINERAL "SUPER CLEAN" HYDRAULIC FLUID