QC Lubricants
CAGE CODE 9Y364
7360 Milnor St Philadelphia, PA 19136
(215) 333-4187 Direct Line

Toll Free
With Extension: (800) 887-2436
For Technical Assistance Dial Extension 203 for Stan Jakubowski
For Sales Assistance Dial Extension 211 for Lu Ann Quinn


Home

We actively supply a comprehensive line of MIL-SPEC and commercial lubricants.



Mil-Specs
Products
MSDS
PDS and Other Docs Shelf Life Data Boeing Specs McDonnell Douglas Specs

ExxonMobile
Castrol
Shell
Valvoline
Anderol
LHB Industries

 

Everlube 9002
Water Based, MoS2 Solid Film Lubricant

Everlube 9002

 

Everlube 9002 Product Description:

Everlube 9002 is a low VOC MoS2 based solid film lubricant with a high molecular weight epoxy binder system. This coating provides excellent wear life, abrasion resistance, and very good chemical resistance and performs best in higher load carrying applications.
Everlube 9002 currently qualifies to MIL-PRF-46010G,
GE A50TF303, and conforms to the requirements of AS5272 Ty III

Everlube 9002 Features / Benefits:

bullet

Excellent wear life

bullet

Excellent abrasion resistance

bullet

Very good chemical resistance

bullet

Lead free

Everlube 9002 Markets:

bullet Aerospace/Defense
bullet Mechanical Components
bullet Industrial Machinery and Equipment
bullet Fabricated Metal Parts
bullet Fasteners

 

Everlube Products Everlube 9002

Everlube 9002 Typical Applications:

bullet Virtually All Fasteners
bullet Bearings and cams
bullet Gears and spines
bullet Engine ring seals

Everlube 9002 Packaging:
QC Lubricants carries Everlube 9002 in Quart and Gallon size containers.

Everlube 9002 Shelf Life:
1 year from date of shipment

Everlube 9002 Physical Properties

Lubricating Solid

MoS2

Binder

High molecular weight Epoxy

Color and Appearance

Gray/Black Matte Finish

Carrier:

Water Based

Solids (by weight)

40% to 44%

Density

10.9 0.5 lb/gal (1270 60 grams/liter)

Flash Point

>200F (93C)

Volatile Organic Compound

183 grams/liter (1.52 lb/gal)

Theoretical Coverage

698 ft2/gal@ 0.5 mils (17.1 m2/liter @ 12.7 microns)

Alternative or Repair Coatings

Solvent based equivalents for Everlube 9002 are our Everlube 620C, Lube Lok 5306, and Everlube 731.
For touch-up applications, Perma-Slik G or Lubri-Bond  220 works well with Everlube 9002.

Everlube 9002 Processing Information

Dry Film Thickness

0.2 to 0.5 mils (5 to 13 microns)

Dilution / Cleanup Solvent

May be thinned with deionized water less than 10% by volume

Dilution Ratio

0 to 9:1 (product to solvent)

Cure Cycle

1 hr. 15 min. @ 400F (recommended) or 2 hrs @ 300F (for substrates that cannot take
recommended cure.)

Suggested Pretreatment

Grit Blast and/or Phosphate

Suggested Application Methods

Dip spin, brush or spray

Everlube 9002 Typical Functional Properties

Everlube 9002 ASTM Test Method Value
Corrosion Resistance
Test Panel

ASTM B117

>100 hours @ 5% Neutral Salt Spray
Test Panel Coating Method

  

 0.8 mil on grit blasted steel panel

Abrasion Resistance

ASTM D4060

Excellent

Coefficient of Friction

ASTM D2714

  0.04 to 0.06

Operating Temperature Range

 

 -100F to 400F
 (-73C to 204C)

Load Carrying Capacity ASTM 2625, Method B > 250,000 psi
Wear Life ASTM 2625, Method A  > 420 minutes

Everlube 9002 Chemical Resistance (ASTM D-2510, Method C)

Isopropyl Alcohol or Ethyl Alcohol

Pass

Mineral Spirits or Paint Thinner

Pass

Toluene

Pass

Acetone

Pass

Skydrol 500:

Pass

Hydraulic Fluids:

Pass

Anti-Icing Fluids:

Pass

Diethanolamine

Pass

Hydrochloric Acid (10%)

Pass

Sodium Hydroxide (10%)

Pass

Distilled Water

Pass

Jet Fuels (JP-4):

Pass

Trichloroethylene

Pass

The above information is for technical reference only and is not intended for use in developing a specification.  This information supplied is presented in good faith and has been derived from sources believed to be reliable. Since conditions of use are beyond our control, all risks are assumed by the user.

As with any product we carry at QC Lubricants, if you have any questions, please give us a call. Our dedicated staff is eager to hear from you!
Back to Solid Film Lubes Main Page

Everlube 9002

PenrecoDaubertAshlandDow Corning