QC Lubricants
CAGE CODE 9Y364
7360 Milnor St Philadelphia, PA 19136
(215) 333-4187 Direct Line

Toll Free
With Extension: (800) 887-2436
For Technical Assistance Dial Extension 203 for Stan Jakubowski
For Sales Assistance Dial Extension 211 for Lu Ann Quinn


Home

We actively supply a comprehensive line of MIL-SPEC and commercial lubricants.



Mil-Specs
Products
MSDS
PDS and Other Docs Shelf Life Data Boeing Specs McDonnell Douglas Specs

ExxonMobile
Castrol
Shell
Valvoline
Anderol
LHB Industries

 

Perma-Slik G
Air Dry, MoS
2 Solid Film Lubricant

Perma-Slik G

 

Perma-Slik G Product Description:

Perma-Slik G is an air drying, MoS2 based solid film lubricant with an epoxy binder system. This coating
provides a low coefficient of friction, good corrosion resistance, and performs best in higher load carrying
applications. Perma-Slik G is qualified to MIL-L-23398, and MIL-PRF-46147C.

Perma-Slik G Features / Benefits:

bullet

Good corrosion resistance

bullet

Good coefficient of friction

bullet

Suitable for field applications

bullet

Ideal for higher load carrying applications

Perma-Slik G Markets:

bullet Aerospace/Defense
bullet Mechanical Components
bullet Industrial Machinery and Equipment
bullet Fabricated Metal Parts
Everlube Products

Perma-Slik G Typical Applications:

bullet Fittings and connectors
bullet Guide, rails and tracks
bullet Bushings, shafts, splines and cams
bullet Seals, clamps and couplings

Perma-Slik G Container sizes:
QC Lubricants carries Perma-Slik G in quart and gallon size containers

Perma-Slik G Shelf Life:
1 year from date of manufacture

Perma-Slik G Physical Properties

Lubricating Solid

MoS2

Binder

Epoxy

Color and Appearance

Gray/Black Matte Finish

Carrier:

Solvent Based

Solids (by weight)

24 to 26%

Density

8.15 0.5 lb/gal (995 60 grams/liter)

Flash Point

24F (-4C)

Volatile Organic Compound

737 grams/liter (6.15 lb/gal)

Theoretical Coverage

286 ft/gal @ 0.5 mils (7 m/liter @ 12.7 microns)

Alternative or Repair Coatings

Solvent based thermally cured equivalents for Perma-Slik G are Everlube 620C, Ecoalube 642, Lube Lok 5306, Everlube 733, and Lube Lok 2109. Water based thermally cured equivalents are Everlube 9002.

Perma-Slik G Processing Information

Dry Film Thickness

0.3 to 0.6 mils (8 to 15 microns)

Dilution / Cleanup Solvent

MEK

Dilution Ratio

1:1 to 1:2 (Product to Solvent)

Cure Cycle

24 hr. @ 77F +/- 10F

Suggested Pretreatment

Grit Blast and/or Phosphate

Suggested Application Methods

Dip Spin and Spray

Perma-Slik G Typical Functional Properties

Perma-Slik G ASTM Test Method Value
Corrosion Resistance
Test Panel

ASTM B117

>100 hours @ 5% Neutral Salt Spray
Test Panel Coating Method

  

 0.8 mil on grit blasted steel panel

Abrasion Resistance

ASTM D4060

Fair

Coefficient of Friction

ASTM D2714

  0.04 to 0.06

Operating Temperature Range

 

 -100 to 250F (-73 to 121C)

Load Carrying Capacity ASTM 2625, Method B > 250,000 psi
Wear Life ASTM 2625, Method A  > 120 minutes
Film Adhesion ASTM D2510 Method A * Pass
Sulfurous acid salt spray Fed-Std-791, method 5331 Pass 4 cycles
Pencil Hardness ASTM D3363 > 3H (gouge)

Perma-Slik G Processing Information

Dry Film Thickness 

0.3 to 0.6 mils (8 to 15 microns)

Dilution / Cleanup Solvent 

MEK

Dilution Ratio

1:1 to 1:2 (Product to Solvent)

Cure Cycle

24 hr. @ 77F +/- 10F

Suggested Pretreatment

Grit Blast and/or Phosphate

 Suggested Application Methods:

Dip Spin or Spray

Perma-Slik G Chemical Resistance (ASTM D-2510, Method C)

Isopropyl Alcohol or Ethyl Alcohol

Pass

Mineral Spirits or Paint Thinner

Pass

Toluene

Pass

Acetone

Pass

Skydrol 500:

Pass

Hydraulic Fluids:

Pass

Anti-Icing Fluids:

Pass

MIL-C-372 Cleaning Compound

Pass

MIL-L-22851 Lubricating Oil

Pass

VV-D-1078 Silicone Damping Fluid

Pass

MIL-L-6082 Lubricating Oil, GD. 1100

Pass

MIL-L-46000 Lubricating Oil

Pass

Diethanolamine

Pass

Hydrochloric Acid (10%)

Pass

Sodium Hydroxide (10%)

Pass

Distilled Water

Pass

Jet Fuels (JP-4):

Pass

Trichloroethylene: TT-S-735   

Pass

Hydrocarbon Test Fluid MIL-PRF-5606 Pass
Petroleum Hydraulic Fluid MIL-PRF-23699 Pass
Lubricating Oil MIL-L-3056 Pass
Gasoline Pass

MIL-PRF-7808 Aircraft Turbine Oil

Pass

The above information is for technical reference only and is not intended for use in developing a specification.  This information supplied is presented in good faith and has been derived from sources believed to be reliable. Since conditions of use are beyond our control, all risks are assumed by the user.

As with any product we carry at QC Lubricants, if you have any questions, please give us a call. Our dedicated staff is eager to hear from you!
Back to Solid Film Lubes Man Page

Everlube Perma-Slik G

PenrecoDaubertAshlandDow Corning